Connector Nnb
Posted February 12, 2011
By admin
Connector Nnb
Check out the Connector Nnb listings below and save:
| Shop->Sports and Outdoors->Boating and Sailing Accessories | ||||
|
RAYMARINE A06028 SEATALKNG - T-PIECE - INSTRUMENTS - GAUGES-ACC from $ 18.72 SeaTalkNG T-Piece Connector. Used for connecting white SeaTalkNG Spur Cables to Blue SeaTalkNG Backbone Cables. Stock Status : In 8 Stores 
|
|||
|
30A 125V Female Connector 305 Crc from $ 27.89 Maro 30a Compact Contour Connector . Convenient secure connector for shore powerSuperior strain-relief system. Features yellow nylon construction, color coded terminal pockets and screws. Dust seal on back keeps contaminants out of terminals. Stock Status : In 7 Stores
|
|||
|
General Trailer Works T Connector Application Guide 5801571 from $ 37.41 One piece plug-in trailer connector kits for light trucks. No stripping, splicing or tracing wire needed. Stock Status : In 2 Stores
|
|||
|
Outside Corner (Male) (Standard Grade) By Tie Down from $ 25.76 The Tie Down Engineering Galvanized Outside Corner Male T-Connector has one welded 1/2" thick tab. The Male T-Connector base plate measures 10 inches long on each leg and is 5 inches high. The Male T-Connector fastens to the corner of the dock with eight (8) 3/8" Galvanized Carriage Bolts. Stock Status : In 3 Stores
|
|||
|
Equiplite Non Swiveling, Low Cost Connectors Connector, 3/8" Max. Line, 3100lb. Swl, 1" Throat
USD 82.99 Equiplite Non Swiveling, Low Cost Connectors Connector, 3/8" Max. Line, 3100lb. Swl, 1" Throat . The EquipLite Non-Swiveling, Low-Cost (NSM) Connectors boast a weight savings of approximately 70% 80% over traditional stainless shackles. The softer materials used result in less damage to masts, spinnaker tracks, decks, etc., when flogging during tacks or pre-start. These connectors are easy and quick to attach; they are ideal for jib sheets, spinnaker sheets and lower load halyards (spinnaker, topping lifts, etc.). These are for use with covered lines only. The advance of the quick loop The specially designed NS Connector system becomes an extension of the spliced rope. It's quick and easy to attach and detach, even with cold and wet hands. Three times stronger than a bowline, it's never hard to undo. High-strength material The NS Connector has a high-tensile aluminum body technology with unmatched impact and wear resistance. The NS Connector does not have a self-tightening or jamming action. It is more compact, lighter and easier to operate compared to bow lines. Reduced damage to the yacht, safe The compact loop connector with Velcro wrap reduces damage to the forestays and rigging. Safer: Light weight reduces risk of injury when flogging, reduced damage to masts, spinnaker tracks, topsides, etc. will not jam even if overloaded and will operate close to break load. Will not fatigue and fail prematurely compared to stainless. Loops are replaceable. Note: Matching parts should be rounded, smooth, and with no sharp edges or burrs. Dyneema loops are coated with an UV coating, recoat when worn for long life. It is recommended that loops should be replaced when worn. 
Notes : Low Price Guarantee Stock Status : in-stock
|
|||
|
Equiplite Non Swiveling, Low Cost Connectors Connector, 1/4" 3/16" Max. Line, 880lb. Swl, 3/4" Throat
USD 48.99 Equiplite Non Swiveling, Low Cost Connectors Connector, 1/4" 3/16" Max. Line, 880lb. Swl, 3/4" Throat . The EquipLite Non-Swiveling, Low-Cost (NSM) Connectors boast a weight savings of approximately 70% 80% over traditional stainless shackles. The softer materials used result in less damage to masts, spinnaker tracks, decks, etc., when flogging during tacks or pre-start. These connectors are easy and quick to attach; they are ideal for jib sheets, spinnaker sheets and lower load halyards (spinnaker, topping lifts, etc.). These are for use with covered lines only. The advance of the quick loop The specially designed NS Connector system becomes an extension of the spliced rope. It's quick and easy to attach and detach, even with cold and wet hands. Three times stronger than a bowline, it's never hard to undo. High-strength material The NS Connector has a high-tensile aluminum body technology with unmatched impact and wear resistance. The NS Connector does not have a self-tightening or jamming action. It is more compact, lighter and easier to operate compared to bow lines. Reduced damage to the yacht, safe The compact loop connector with Velcro wrap reduces damage to the forestays and rigging. Safer: Light weight reduces risk of injury when flogging, reduced damage to masts, spinnaker tracks, topsides, etc. will not jam even if overloaded and will operate close to break load. Will not fatigue and fail prematurely compared to stainless. Loops are replaceable. Note: Matching parts should be rounded, smooth, and with no sharp edges or burrs. Dyneema loops are coated with an UV coating, recoat when worn for long life. It is recommended that loops should be replaced when worn.
Notes : Low Price Guarantee Stock Status : in-stock
|
|||
|
Dock Hardware Galvanized Outside Corner Female T-Connector 26400 Commercial Grade
USD 54.20 The Tie Down Engineering Galvanized Outside Corner Female T-Connector has two welded 1/2" thick tabs. The Female T-Connector base plate measures 10 inches long on each leg and is 5 inches high. The Female T-Connector fastens to the corner of the dock with eight (8) 3/8" Galvanized Carriage Bolts.Use with the Galvanized Outside Corner Male T-Connector (Item No. TIE-26522 or TIE-25491) to attach hinged dock sections end-to-end.
Notes : Great prices on over 50,000 boating & building items. Fast shipping. Stock Status : in-stock
|
|||
|
Equiplite Non Swiveling, Low Cost Connectors Connector, 9/16" Max. Line, 5300lb. Swl, 2 3/4" Throat
USD 132.99 Equiplite Non Swiveling, Low Cost Connectors Connector, 9/16" Max. Line, 5300lb. Swl, 2 3/4" Throat . The EquipLite Non-Swiveling, Low-Cost (NSM) Connectors boast a weight savings of approximately 70% 80% over traditional stainless shackles. The softer materials used result in less damage to masts, spinnaker tracks, decks, etc., when flogging during tacks or pre-start. These connectors are easy and quick to attach; they are ideal for jib sheets, spinnaker sheets and lower load halyards (spinnaker, topping lifts, etc.). These are for use with covered lines only. The advance of the quick loop The specially designed NS Connector system becomes an extension of the spliced rope. It's quick and easy to attach and detach, even with cold and wet hands. Three times stronger than a bowline, it's never hard to undo. High-strength material The NS Connector has a high-tensile aluminum body technology with unmatched impact and wear resistance. The NS Connector does not have a self-tightening or jamming action. It is more compact, lighter and easier to operate compared to bow lines. Reduced damage to the yacht, safe The compact loop connector with Velcro wrap reduces damage to the forestays and rigging. Safer: Light weight reduces risk of injury when flogging, reduced damage to masts, spinnaker tracks, topsides, etc. will not jam even if overloaded and will operate close to break load. Will not fatigue and fail prematurely compared to stainless. Loops are replaceable. Note: Matching parts should be rounded, smooth, and with no sharp edges or burrs. Dyneema loops are coated with an UV coating, recoat when worn for long life. It is recommended that loops should be replaced when worn.
Notes : Low Price Guarantee Stock Status : in-stock
|
|||
|
SmartPlug 30 Amp Boatside Inlet and Connector
USD 164.92 30 Amp Boatside Inlet and ConnectorThe SmartPlug 30 Amp Boatside Inlet and Connector (B30ASSY) includes the 30 Amp Boatside Inlet (BM30S) and the 30 Amp Boatside Connector (BF30), everything you need to protect your boat from boatside shore power overheating and burning. Installation of both components is easy. Simply replace the connector on the boatside end of your existing shore power cordset, as well as the shore power inlet on your boat with the superior SmartPlug equivalent using the included instructions. Features Trip thermostat in inlet cuts power before overheating Straight electrical blades with 20x more contact area Three weatherproof seals Multi-point locking system Marine-grade 316 stainless steel constructionIncludes 30 Amp Connector (BF30) 30 Amp Inlet (BM30S) Install tool for connector Cord seal for connector (3) connector face screws Inlet rear mounting gasket
Notes : Stock Status : in-stock
|
|||
|
Equiplite Non Swiveling, Low Cost Connectors Connector, 7/16" 1/2" Max. Line, 4000lb. Swl, 3/16" Throat
USD 99.99 Equiplite Non Swiveling, Low Cost Connectors Connector, 7/16" 1/2" Max. Line, 4000lb. Swl, 3/16" Throat . The EquipLite Non-Swiveling, Low-Cost (NSM) Connectors boast a weight savings of approximately 70% 80% over traditional stainless shackles. The softer materials used result in less damage to masts, spinnaker tracks, decks, etc., when flogging during tacks or pre-start. These connectors are easy and quick to attach; they are ideal for jib sheets, spinnaker sheets and lower load halyards (spinnaker, topping lifts, etc.). These are for use with covered lines only. The advance of the quick loop The specially designed NS Connector system becomes an extension of the spliced rope. It's quick and easy to attach and detach, even with cold and wet hands. Three times stronger than a bowline, it's never hard to undo. High-strength material The NS Connector has a high-tensile aluminum body technology with unmatched impact and wear resistance. The NS Connector does not have a self-tightening or jamming action. It is more compact, lighter and easier to operate compared to bow lines. Reduced damage to the yacht, safe The compact loop connector with Velcro wrap reduces damage to the forestays and rigging. Safer: Light weight reduces risk of injury when flogging, reduced damage to masts, spinnaker tracks, topsides, etc. will not jam even if overloaded and will operate close to break load. Will not fatigue and fail prematurely compared to stainless. Loops are replaceable. Note: Matching parts should be rounded, smooth, and with no sharp edges or burrs. Dyneema loops are coated with an UV coating, recoat when worn for long life. It is recommended that loops should be replaced when worn.
Notes : Low Price Guarantee Stock Status : in-stock
|
|||
More Connector Nnb listed below:
