hi i have a 96' Cherokee w/ 192,000 on it Auto Transmission 4X4. And off an on the transmission will slip kinda. When i take off from a dead stop in Over drive or 3 it slips, but if i shift i manually and pull it into 1st/2nd gear it takes right off. I heard it could be some sort of electrical thing that keeps it from downshifting.
Also only a few times i have heard like a grinding coming from my rear end maybe or still realted to the transmission problem idk? It has only done it a handful of times.
ANy ideas on what it might be?
P.S. Its not worth putting a new trany in i didnt pay that much for the jeep and i have more tham abused this truck so its already paid itself off. Tuff little F***er.
I agree with the tranny filterfluid change. But a little addition to this is band adjustment. While your in the pan there is a little square bolt with a lock nut on it. This is your band adjustment. I don't know the exact specs on the 96 but if you buy the Haynes manual (you should for every car you own, if your going to work on them yourself) It will tell you something like "tighten to 64 in lbs, back off 2 12 turns"
There is also another one on the outside of the transmission with the same scenario. These two bolts adjust your front and rear bands in the transmission. A torque wrench in Inch pounds can be bought for under $30 at like a Harbor Freight Store. No need to buy the best as I never use the thing but once a year. The filter is also of paramount importance. If it is clogged the transmission can not build enough pressure to shift, until you get into the higher RPMs.
Flitz CA-03518, 2 Pound Can of Metal Polish Paste. The product that put Flitz on the map. Flitz is one of the best metal polish on the market. Flitz works great on: tarnished brass, copper, bronze, gold, silver, blued firearms it will not damage the bluing, aluminum, mag alloys, stainless steel, fiberglass, and painted surfaces. Flits provides corrosion protection as well as removing corrosion. Flitz is guaranteed to clean and protect against rust, tarnish, water stains and salt, or fresh water corrosion. Flitz is made in West Germany.
Stock Status : In 14 Stores
Ritchie X-10A RitchieSport Bracket Mount Compass (Ritchie)
from $ 32.94
The Ritchie& X-10-A RitchieSport bracket-mount compass is easy-to-install on a windshield or dash with 2-sided, self-adhesive mounting pads and a reversible bracket that adjusts through 300-degrees. This compass has a hardened steel pivot and sapphire jewel movement, plus built-in compensators.
Stock Status : In 10 Stores
Auto Tab Control Kit
from $ 233.10
Maximize trim tab efficiency and increase your boating safety. The Auto Tab Control connects with your boats trim tab system and operates the hydraulic power unit for trim tab adjustment.
Stock Status : In 8 Stores
Taylor Made Products Tuff End Inflatable Vinyl Boat Fender (19" x 50") (Taylor Made)
from $ 286.54
For Heavy duty marine application Injection molded ends tested to 2000 psi tensile strength Tri-valve for easy inflation with football needle or compressor Constructed from flexible and resilient marine grade vinyl Tuff End fenders feature a seamless construction, the strongest in the industry
Stock Status : In 3 Stores
Taylor Made Products Tuff End Inflatable Vinyl Boat Fender (6" x 25") (Taylor Made)
from $ 36.70
For Heavy duty marine application Injection molded ends tested to 2000 psi tensile strength Tri-valve for easy inflation with football needle or compressor Constructed from flexible and resilient marine grade vinyl Tuff End fenders feature a seamless construction, the strongest in the industry
Stock Status : In 3 Stores
Mustang Survival High Visibility Inflatable Pfd With Hit
from $ 240.91
Mustant MD3183 T3 High Visibility Inflatable PFD w HITHigh Visibility Inflatable PFD w HITThe MD3183 Inflatable PFD with HIT Hydrostatic Inflator Technology is Mustang Survivals topoftheline inflatable PFD.
Stock Status : In 6 Stores
Taylor Made Products Tuff End Inflatable Vinyl Boat Fender (12" x 35")
from $ 90.79
For Heavy duty marine application Injection molded ends tested to 2000 psi tensile strength Tri-valve for easy inflation with football needle or compressor Constructed from flexible and resilient marine grade vinyl Tuff End fenders feature a seamless construction, the strongest in the industry
Stock Status : In 2 Stores
Taylor Made Products Tuff End Inflatable Vinyl Boat Fender (24" x 57", White) (Taylor Made)
from $ 325.09
For Heavy duty marine application Injection molded ends tested to 2000 psi tensile strength Tri-valve for easy inflation with football needle or compressor Constructed from flexible and resilient marine grade vinyl Tuff End fenders feature a seamless construction, the strongest in the industry
Stock Status : In 5 Stores
3M Perfect-It III Auto Detailing Cloth, 12-inch x 14-inch (6 pack) USD 25.95
3M Perfect-It III Auto Detailing Cloth, Light Blue, 12 in x 14 in (3M 06020) - Removes oily or filmy residue including waxes, polishes, glazes and fingerprints, and is ideal for paint, chrome, glass, dashboards, and more. 3M's unique super-soft micro-texture won't scratch or streak delicate surfaces.
Notes :
Stock Status : in-stock
Auto Anchor Autoanchor 710 Wireless Remote Control & Rode Counter USD 963.89
Auto Anchor Autoanchor 710 Wireless Remote Control & Rode Counter . AutoAnchor 710 for control anywhere on the boat see at a glance the length of deployed anchor rode Full windlass control and chain counting Controls bow and stern thrusters independently and together Preset the length of rode to deploy Auto stop and docking alarm when the anchor is close to docking Works with rope/chain or all-chain rode Logs windlass operating hours for maintenance Easy installation and set up on most windlasses Plug and play sensor installation Console unit is shockproof, waterproof and will float High level wireless transmission security with unique ID Safety lock reduces unwanted operation Ergonomic shape with rubber grip for wet conditions Console holder and protective cover Displays signal strength and battery level Use with DC, AC and Hydraulic systems Operates in parallel with other control equipment (toggle switches, foot switches and other electronic controllers) Function Options A system with one base station (6 outputs) can operate: One windlass plus a deck wash and deck light Or one windlass and one or two thrusters Kit includes one console, one base station, one sensor, one magnet, load sensing connectors, installation and operation instructions. Additional consoles and base stations sold separately. Power Supply: Remote Console: Two AA1.5V batteries; Base Station: 12/24V DC Base Station Current Consumption: 50mA Base Station Output Current Draw: 12V DC: 10mA min/4A max; 24V DC: 20mA min/4A max IP Rating: IP67 Operating Temperature Range: 23F to 140F ( 5C to 60C) Wireless Transmission: 2.4GHz ISM band, IEEE 802.15.4 compliant, 64-bit unique ID Wireless Range: Typical Minimum 10m (30ft). Range depends on installation.
Notes : Low Price Guarantee
Stock Status : in-stock