Aluminum Winch
Posted September 28, 2008
By admin
Aluminum Winch
Do you think this $ 250 boat and trailer worth?
Would you pay $ 250 and under Linked pictures in a trailer 2 boats? Aluminum Boat 12 'John Boat and trailer Is made entirely of steel. You can see a picture In addition, the trailer tires, jack, and extra features hand Winch. to http://i87.photobucket.com/albums/k132/lackey1981/0208091657.jpg
If the extra $ 250 dollars and I Enough extra time for a few hours, a week floating the lake I was spending around a bug, I paid $ 250 for the set I will. It is not too bad motor, but you do Electric motors and batteries can always get other places. Our house Most of the fishing lakes around the Electric Motor anyway just Wed Can.
Check out the Aluminum Winch listings below and save:
| Shop->Sports and Outdoors->Boating and Sailing Accessories | ||||
|
Harken Ball Bearing Winch Handles 10" Lock-In Alum. Winch Handle from $ 88.20 Product Features: Maintenance and Care Type: Bearings; Trailer Accessory Type: Winches Stock Status : In 4 Stores 
|
|||
|
Standard One And Two Speed Winches 7A Single Speed Winch Alum 7.9:3 (Lewmar) from $ 185.06 Product Features: Trailer Accessory Type: Winches Stock Status : In 1 Stores
|
|||
|
Fulton& F2™ Trailer Winch (Fulton) from $ 137.48 Designed for improved performance and style, the Fulton F2 Winch has a fully enclosed one-piece aluminum frame that protects working gears and strap. Made of strong corrosion-resistant materials to resist damage from moisture and salt. The ergonomic Stock Status : In 3 Stores
|
|||
|
Kfi Atv Utv Sxs A3000 Winch 3000lbs
USD 221.95 KFI A3000 Winch Whether its on a winding trail, plowing snow or deep in the mud, a reliable winch is the most important accessory a rider can have. Equip your ATV, UTV or SxS with a KFI WINCH and feel confident you can pull yourself out of any situation. This 3000lb ATV Series winch features quality cast aluminum and durable steel components, Water Resistant seals to keep the elements out, a standard 4-hole mounting design and a heavy duty all metal turn clutch. It is also backed by a KFI 1-Year Limited Warranty. The KFI A3000 Winch comes with everything you need other than an ATV model specific winch mount. Everything shown is included along with detailed installation instructions and hardware to mount your winch to a model specific ATV winch mount. Specifications: Model: A3000 ATV Series Rated Line Pull: 3000 lbs. Motor: 12V DC, 1.5 hp Permanent Magnet Gear Ratio: 171:1 Gear/Transmission: All-metal Planetary Gear Drive Brake: Dynamic and Mechanical Clutch (free spooling): All Metal Cam Activated Freespool D 
Notes : Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply. Stock Status : in-stock
|
|||
|
Kfi Atv Utv Sxs A2500 Winch 2500lbs
USD 210.95 KFI A2500 Winch Whether its on a winding trail, plowing snow or deep in the mud, a reliable winch is the most important accessory a rider can have. Equip your ATV, UTV or SxS with a KFI WINCH and feel confident you can pull yourself out of any situation. This 2500lb ATV Series winch features quality cast aluminum and durable steel components, Water Resistant seals to keep the elements out, a standard 4-hole mounting design and a heavy duty all metal turn clutch. It is also backed by a KFI 1-Year Limited Warranty. The KFI A2500 Winch comes with everything you need other than an ATV model specific winch mount. Everything shown is included along with detailed installation instructions and hardware to mount your winch to a model specific ATV winch mount. Specifications: Model: A2500 ATV Series Rated Line Pull: 2500 lbs. Motor: 12V DC, 1.2 hp Permanent Magnet Gear Ratio: 171:1 Gear/Transmission: All-metal Planetary Gear Drive Brake: Dynamic and Mechanical Clutch (free spooling): All Metal Cam Activated Freespool D
Notes : Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply. Stock Status : in-stock
|
|||
|
Kfi Atv Utv Sxs U4000 Winch 4500lbs
USD 298.95 KFI U4000 Winch Whether its on a winding trail, plowing snow or deep in the mud, a reliable winch is the most important accessory a rider can have. Equip your UTV or SxS with a KFI WINCH and feel confident you can pull yourself out of any situation. This 4500lb UTV Series winch features quality cast aluminum and durable steel components, Water Resistant seals to keep the elements out, a standard 4-hole mounting design and a heavy duty all metal turn clutch. It is also backed by a KFI 1-Year Limited Warranty. The KFI U4500 Winch comes with everything you need other than a UTV model specific winch mount. Everything shown is included along with detailed installation instructions and hardware to mount your winch to a model specific UTV winch mount. Specifications: Model: U4500 ATV Series Rated Line Pull: 4500 lbs. Motor: 12V DC, 1.7 hp Permanent Magnet Gear Ratio: 166:1 Gear/Transmission: All-metal Planetary Gear Drive Brake: Dynamic and Mechanical Clutch (free spooling): All Metal Cam Activated Freespool Drum Si
Notes : Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply. Stock Status : in-stock
|
|||
|
Harken #46 Two Speed Aluminum Non Self Tailing Winch
USD 1130.40 Harken #46 Two Speed Aluminum Non Self Tailing Winch . Radial winches were designed from the deck up with three key ideas in mind: safety and long-lasting performance, streamlined installation, and hydraulic/electric upgrades as part of the design rather than afterthoughts. Powerful, Efficient, Dependable: The details make the difference. The gripping surfaces of Radial Winches are shaped, and do not depend on friction to hold the line The winch top is completely covered, so fingers and clothing do not get caught in moving partsSeasonal maintenance is exceptionally easy; the top lifts out as a single unit, making reassembly quick and mistake free Integrated Stripper Arm: The strong, one-piece stripper arm completely covers the winch top for a stable platform that prevents fingers and clothing from catching on moving parts, an important safety feature, particularly when operating powered winches. The arm can be adjusted to multiple positions after the winch is mounted, and is shaped to smoothly feed line into and out of the spring-loaded self-tailing jaws. Lightweight, High-Strength Materials: Composite roller bearings and bushings reduce friction under load, have excellent corrosion resistance, and don t require lubrication. Snap-fit design keeps bearings captive in a high-strength Delrin cage when drum is removed for maintenance Load-carrying gears and pins are 17-4PH stainless steel for strength and durability Weight savings of 25 to 50 percent compared to the Classic Harken line Easy to Service and Maintain: Winches can be disassembled and serviced on deck. The socket, washer, and screw-top snap-fit together to simplify maintenance and for mistake-free assembly.1. Power Grip Jaws Composite self-tailing jaws of long-glass fiber are shaped for easy line entry and optimum gripping power. The spring-loaded upper jaw adjusts under line pressure to accept a variety of line sizes. Teeth grip evenly with or without load. 2. Radial Shaped Surface Grip The drum s gripping surface is shaped for each winch size and drum material and features diagonal ribs (rather than textured abrasive materials) to maximize gripping power and greatly reduce line wear. When easing, the angle of the ribs stops line from rising, preventing overrides and providing a smooth controlled release as the line exits the winch. 3. Quick Installation Patent-pending stud-bolt mounting system allows one person to quickly install a winch without removing the drum. a. Snap off the skirt at the base of the winch b. Slide bolts through the slots in the winch base and snap the plastic skirt back on c. Place the stud bolts into the pre-drilled holes on the deck and tighten them from below deck #46 Radial Plain-Top Aluminum Two Speed Winch 9.17:1 1st Gear Ratio 6.28:1 2nd Gear Ratio 11.7:1 Power Ratio 1st 46.5:1 Power Ratio 2nd
Notes : Low Price Guarantee Stock Status : in-stock
|
|||
|
Harken #20 Single Speed Aluminum Self Tailing Winch
USD 523.44 Harken #20 Single Speed Aluminum Self Tailing Winch . Radial winches were designed from the deck up with three key ideas in mind: safety and long-lasting performance, streamlined installation, and hydraulic/electric upgrades as part of the design rather than afterthoughts. Powerful, Efficient, Dependable: The details make the difference. The gripping surfaces of Radial Winches are shaped, and do not depend on friction to hold the line The winch top is completely covered, so fingers and clothing do not get caught in moving partsSeasonal maintenance is exceptionally easy; the top lifts out as a single unit, making reassembly quick and mistake free Integrated Stripper Arm: The strong, one-piece stripper arm completely covers the winch top for a stable platform that prevents fingers and clothing from catching on moving parts, an important safety feature, particularly when operating powered winches. The arm can be adjusted to multiple positions after the winch is mounted, and is shaped to smoothly feed line into and out of the spring-loaded self-tailing jaws. Lightweight, High-Strength Materials: Composite roller bearings and bushings reduce friction under load, have excellent corrosion resistance, and don t require lubrication. Snap-fit design keeps bearings captive in a high-strength Delrin cage when drum is removed for maintenance Load-carrying gears and pins are 17-4PH stainless steel for strength and durability Weight savings of 25 to 50 percent compared to the Classic Harken line Easy to Service and Maintain: Winches can be disassembled and serviced on deck. The socket, washer, and screw-top snap-fit together to simplify maintenance and for mistake-free assembly.1. Power Grip Jaws Composite self-tailing jaws of long-glass fiber are shaped for easy line entry and optimum gripping power. The spring-loaded upper jaw adjusts under line pressure to accept a variety of line sizes. Teeth grip evenly with or without load. 2. Radial Shaped Surface Grip The drum s gripping surface is shaped for each winch size and drum material and features diagonal ribs (rather than textured abrasive materials) to maximize gripping power and greatly reduce line wear. When easing, the angle of the ribs stops line from rising, preventing overrides and providing a smooth controlled release as the line exits the winch. 3. Quick Installation Patent-pending stud-bolt mounting system allows one person to quickly install a winch without removing the drum. a. Snap off the skirt at the base of the winch b. Slide bolts through the slots in the winch base and snap the plastic skirt back on c. Place the stud bolts into the pre-drilled holes on the deck and tighten them from below deck #20 Radial Self-Tailing Aluminum Single-Speed Winch 2.76:1 1st Gear Ratio 19.20:1 Power Ratio
Notes : Low Price Guarantee Stock Status : in-stock
|
|||
|
Portable Winch Snatch Block- Stainless Steel 10k Lb Break Strength Pca-1274
USD 69.99 This rugged Snatch Block from Portable Winch lets you haul bigger loads with your Portable Capstan Winch. Aluminum sheave with sintered bronze bushing and stainless steel plates. Application: Snatch block, Works With: Portable Winch Capstan, Material: Aluminum, stainless steel Works with 3/8in. to 1/2in. ropes Provides 98% efficiency Manufacturer: Portable Winch MPN: PCA-1274
Notes : Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply. Stock Status : in-stock
|
|||
|
Harken #35 Two Speed Aluminum Self Tailing Winch
USD 871.92 Harken #35 Two Speed Aluminum Self Tailing Winch . Radial winches were designed from the deck up with three key ideas in mind: safety and long-lasting performance, streamlined installation, and hydraulic/electric upgrades as part of the design rather than afterthoughts. Powerful, Efficient, Dependable: The details make the difference. The gripping surfaces of Radial Winches are shaped, and do not depend on friction to hold the line The winch top is completely covered, so fingers and clothing do not get caught in moving partsSeasonal maintenance is exceptionally easy; the top lifts out as a single unit, making reassembly quick and mistake free Integrated Stripper Arm: The strong, one-piece stripper arm completely covers the winch top for a stable platform that prevents fingers and clothing from catching on moving parts, an important safety feature, particularly when operating powered winches. The arm can be adjusted to multiple positions after the winch is mounted, and is shaped to smoothly feed line into and out of the spring-loaded self-tailing jaws. Lightweight, High-Strength Materials: Composite roller bearings and bushings reduce friction under load, have excellent corrosion resistance, and don t require lubrication. Snap-fit design keeps bearings captive in a high-strength Delrin cage when drum is removed for maintenance Load-carrying gears and pins are 17-4PH stainless steel for strength and durability Weight savings of 25 to 50 percent compared to the Classic Harken line Easy to Service and Maintain: Winches can be disassembled and serviced on deck. The socket, washer, and screw-top snap-fit together to simplify maintenance and for mistake-free assembly.1. Power Grip Jaws Composite self-tailing jaws of long-glass fiber are shaped for easy line entry and optimum gripping power. The spring-loaded upper jaw adjusts under line pressure to accept a variety of line sizes. Teeth grip evenly with or without load. 2. Radial Shaped Surface Grip The drum s gripping surface is shaped for each winch size and drum material and features diagonal ribs (rather than textured abrasive materials) to maximize gripping power and greatly reduce line wear. When easing, the angle of the ribs stops line from rising, preventing overrides and providing a smooth controlled release as the line exits the winch. 3. Quick Installation Patent-pending stud-bolt mounting system allows one person to quickly install a winch without removing the drum. a. Snap off the skirt at the base of the winch b. Slide bolts through the slots in the winch base and snap the plastic skirt back on c. Place the stud bolts into the pre-drilled holes on the deck and tighten them from below deck#35 Radial Self-Tailing Aluminum Two-Speed Winch2.13:1 1st Gear Ratio 5.65:1 2nd Gear Ratio13.5:1 1st Power Ratio 35.9 2nd Power Ratio
Notes : Low Price Guarantee Stock Status : in-stock
|
|||
Building The Dodge Rammit Winch Bumper
More Aluminum Winch listed below:
Why are the elderly and the dust, many people do not know about Danny Dean Is the son of confrontation is the best he can do the switch from Friendly to people around the sparkling nunyieul flirtatiously in an instant that Below.
