Replaces Mercruiser
Replaces Mercruiser
Can I replace the bad motor mercruiser 3.0 alpha to do with it?
I just Motor 3.0 mercruiser with alpha 1,992 bayliner bad purchase. I wonder Can I Have the type of motor units is consistent with the low boat Was it? Any help would be great. Thank you.
I use the same drive that they believe to 5.7. Some 454 years of use even when they are it. All Chevrolet To the Motor Mounts bolt up to it when doing the swap The rest of the drive pipe complex. common to v6 on a boat I was in the size of the late 90's in the middle.
Check out the Replaces Mercruiser listings below and save:
| Shop->Sports and Outdoors->Boating and Sailing Accessories | ||||
|
Tungsten Marine - Power Trim Cylinder Hose Hydraulic for Mercruiser - Grey
USD 29.95 Power Trim Cylinder Hose Hydraulic for Mercruiser - Grey Replaces Mercruiser 32-861128 (older 32-95859). This hose is approximately 48" long and has 1/4" fittings on both ends. Color is Grey. It connects from the Oildyne pump to the connector block. It is also known as the "down" or "low" pressure line It fits most Oildyne applications from 1986 and up including: R/MR/Alpha One and SS models from 1983-1990 (SN 6225577 and up), Alpha Gen II from 1991-2004 (SN OD469859 and up), Bravo I, II, and III models from 1998-1998 (SN OB664190-OF345867) Blackhawk from 1988-1995 (SN OF186717 and up). We also carry the "black" hydraulic hose. Please look at our part number TM2123! 
Notes : Fantastic prices with ease & comfort of Amazon.com! Stock Status : in-stock
|
|||
|
Power Trim Cylinder Hose Hydraulic for Mercruiser - Black
USD 29.95 Power Trim Cylinder Hose Hydraulic for Mercruiser - Black. Replaces Mercruiser 32-861127 (older 32-95858). This high pressure hose is approximately 45 1/2" long and has 1/4" fittings on both ends. Color is Black. It connects from the Oildyne pump to the hydraulic connector. It is also known as the "high" or "up" pressure line. It fits most Oildyne applications from 1986 and up including: R/MR/Alpha One and SS models from 1983-1990 (SN 6225577 and up), Alpha Gen II from 1991-2004 (SN OD469859 and up), Bravo I, II, and III models from 1998-1998 (SN OB664190-OF345867) Blackhawk from 1988-1995 (SN OF186717 and up). We also carry the "grey" hydraulic hose.
Notes : Fantastic prices with ease & comfort of Amazon.com! Stock Status : in-stock
|
|||
|
Mercruiser-Type Replacement Pump
USD 519.99 Composite aluminum, plastic, and cast iron construction of original Mercruiser water pumps does not hold up in marine environments. Now you have the choice to replace the complete pump assembly, the end cover only, or the impeller with a more durable, longer lasting pump. The Jabsco Mercruiser-type replacement pump has a one-piece bronze body and bronze end-plate with a replaceable cam and wear-plate so it can be rebuilt when needed. This item replaces Mercruiser OE# 46-72774-A32.
Notes : Fantastic prices with ease & comfort of Amazon.com! Stock Status : in-stock
|
|||
|
Engine Coupler for Older Mercruiser Chevy 110-260HP replaces 76850A2
USD 99.95 Engine Coupler for Mercruiser replaces Mercruiser 76850A2. It fits all Chevy (GM) engines that used a 2-piece rear main seal (All Chevy V8's 1985 and before are 2-piece). It also fits the Chevy (GM) inline engines 1984 and before that did not use a "triangular" coupler. Applications include 110 HP Serial No's 1537370 - 2044030, 120 HP Serial No's 1537370 - 6229717, 140 HP Serial No's 2508261 - 6229717, 140 HP (6 cyl) Serial No's 1538930 - 1725960, 150 HP Serial No's 1666495 - 2048046, 160 HP Serial No's 2048022 - 2770031, 165 (6 cyl) Serial No's 2770032 & Up, 185 HP (229cid) Serial No's 6330183 & Up, 185 HP (262cid) early models of A331455 & Up (check owner's manual!), 190 HP Serial No's 1564539 - 1730903, 898 (198HP) early models of 4762210 & Up (check owner's manual!), 200 HP early models of 6218462 & Up (check owner's manual!), 205 (262cid) early models of A331455 & Up, 225 HP Serial No's 1539620 - 2694014, 228 HP Serial No's 4765100 - 6218461, 230 HP early models of 6218462 & Up (check owner's manual!), 250 HP Serial No's 4768000 - 4908849, 260 HP Serial No's 4908850 - 6218461, 260 HP early models of 6218462 & Up (check owner's manual!), 300MR early models of 6668677 & Up (check owner's manual!)
Notes : Fantastic prices with ease & comfort of Amazon.com! Stock Status : in-stock
|
|||
|
Engine Coupler for Mercruiser with Ford Engines replaces 59826A3
USD 149.95 Engine Coupler for Mercruiser with Ford Engines Replaces Mercruiser part number 59826A3. This brand new engine coupler is designed to fit the following applications: 888 Ford (188 Hp) Serial No's 3108723 and up; 225 and 225 S Ford Serial No's 3385721 and up; 233 Ford Serial No's 4173000 and up.
Notes : Fantastic prices with ease & comfort of Amazon.com! Stock Status : in-stock
|
|||
|
Upper Gear Set for Mercruiser 1.65:1 Ratio replaces 43-45814A5
USD 149.95 Upper Gear Set for Mercruiser 1.65:1 Ratio Replaces 43-45814A5. This is a brand new gear set. It has 24 teeth on each gear and replaces the 1.65:1 (1.62:1) ratio upper gear sets for the Inline 6 cylinder models K999999 and below. Some applications include: 165 Models from 1970-1981 (2763442 and up), R, MR, and Alpha One models from 1983-1990 (6225577 and up), Alpha Gen II models from 1991-1997 (OD469859-OK999999). Please check the current tooth count on your gears. If you have any question please contact us for application information.
Notes : Fantastic prices with ease & comfort of Amazon.com! Stock Status : in-stock
|
|||
|
Exhaust Tube Bellows for Mercruiser 3" ID with Clamps replaces 32-90949T
USD 27.95 Exhaust Tube Bellows for Mercruiser 3" ID with Clamps Replaces Mercruiser 32-90949T. Bellows measure approximately 4" in length. Fits Mercruiser 470/485, 185, 205, 228, and 260 with 3" ID exhaust connectors. Includes (4) Marine Grade Stainless Steel Clamps
Notes : Fantastic prices with ease & comfort of Amazon.com! Stock Status : in-stock
|
|||
|
MERCRUISER OMC STARTER 3.0 Long-Short Mount
USD 61.90 Aftermarket Starter For Mercruiser, OMC, and other Delco PG260M Series1.7 kW, 12 Volt, CW, 11-Tooth PinionComes with mounting bolts -'One long-one short' bolt pattern. This marine boat starter fits nearly all Mercruiser, Cobra, Yamaha, and Volva Penta GM 3.0 liter engines.This permanent magnet high torque gear reduction starter also replaces the older large style 10MT Delco starters with the 'one long-one short' bolt pattern! It provides higher torque with less drain on your battery.Used On:Mercury Marine, OMC, Volvo-PentaFits Merc, OMC, Volvo V6 & V8 engines- GM Block using a 12 inch flywheel.High Torque Gear Reduction with straight across bolt pattern.This starter has an 11 tooth pinion that will replace the older style 9 tooth models.Features:OE performance torque & outputHigh performance rare earth magnets are completely sealed from moisture & contaminantsField case assys. are 100% tested on a computerized gaussmeter to measure magnet strength & positionZinc yellow dichromate field case, solenoid, C.E. cover & hardwareArmatures are precision balanced & feature banded hairpinsCommutators are stake-welded & polished for longer brush lifeCarbon brushes are welded - same as OEAll component parts are OE interchangeableStarter, drive & solenoid are endurance testedSpecifications:Type: PMGRVoltage: 12 VoltskW: 1.7 kWRotation: CWTeeth/Splines: 11 Teeth/SplinesPinion/Splines OD: 29.6mm / 1.165inDE Housing Number: 371-12135Mounting Hole 1: 10.1mm ID - UnthreadedMounting Hole 2: 10.1mm ID - UnthreadedNew or Remanufactured: NewApproximate Weight: 8.24 lbs / 3.75 kgNotes: Straight Mounting Flange, four-terminal solenoid, one extension on thru boltReplaces these part numbers:DELCO: 10465606, 9000895OMC: 3858463VOLVO: 3862308Will also replace older style 10MT Delco starters. Call us for more information.
Notes : Fantastic prices with ease & comfort of Amazon.com! Stock Status : in-stock
|
|||
|
Mercruiser 3.0 Marine Starter Long-Short Mount 6563
USD 59.90 Aftermarket Starter For Mercruiser, OMC, and others.Starter - Aftermarket replacement for Delco PG260M Series1.7 kW, 12 Volt, CW, 11-Tooth PinionComes with mounting bolts -'One long-one short' bolt pattern.This marine boat starter fits nearly all Mercruiser, Cobra, Yamaha, and Volva Penta GM 3.0 liter engines.**This starter will not replace the older large style 10MT Delco starters with the 'one long-one short' bolt pattern! Search for our SDR0272 starter to replace the large style 10MT Delco starters!**Specifications:Type:PMGRVoltage:12 VoltskW:1.7 kWRotation:CWTeeth/Splines:11 Teeth/SplinesPinion/Splines OD:29.6mm / 1.165inDE Housing Number:371-12135Mounting Hole 1:10.1mm ID - UnthreadedMounting Hole 2:10.1mm ID - UnthreadedApproximate Weight:8.24 lbs / 3.75 kgNotes:Straight Mounting Flange, four-terminal solenoid, one extension on thru boltApplications:MERCRUISER MARINEStern DriveModel 3.0 / 3.0LX GM 3.0L - 181ci - 4cyl 1990-1998OMC MARINEEngines - Marine2.5L 4cyl, 153ci, 2.5L GM 1984-19863.0L 4cyl, 181ci, 3.0L GM 1984-19963.8L 6cyl, 231ci, 3.8L GM 1984-19854.3L 6cyl, 262ci, 4.3L GM 1985-19865.0L 8cyl, 305ci, 5.0L GM 1984-19865.7L 8cyl, 350ci, 5.7L GM 1984-1986VOLVO PENTA MARINEINBOARD & STERNDRIVE3.0GL 4cyl, 181ci, 3.0L Gas 1993-19993.0GS 4cyl, 181ci, 3.0L Gas 1993-1999AQ175A 6cyl Gas 1981-1985AQ200A,B,C,D,F 8cyl Gas 1969-1986AQ205A 6cyl Gas 1988-1989AQ211A 8cyl Gas 1986-1989AQ225A,B,C,D,F 8cyl Gas 1973-1986AQ231A,B 8cyl Gas 1986-1989AQ260A,B 8cyl Gas 1978-1985AQ271A,B,C 8cyl Gas 1986-1989AQ290A 8cyl Gas 1979-1985AQ311A,B 8cyl Gas 1986-1989BB231A 8cyl Gas 1987BB260A,B,C 8cyl Gas 1978-1987BB261A 8cyl Gas 1988-1989
Notes : Fantastic prices with ease & comfort of Amazon.com! Stock Status : in-stock
|
|||
|
U-joint Bellows for Older Mercruiser Drives Without Ridge
USD 28.95 Replaces Mercruiser 36223A2. Fits all older Mercruiser Units without "ridge" to hold bellows (Serial No. 3443920 and lower). Kit includes bellows, marine grade stainless steel clamps and grounding clips.
Notes : Fantastic prices with ease & comfort of Amazon.com! Stock Status : in-stock
|
|||
Mercruiser 5.0L replaced with a 5.7L
More Replaces Mercruiser listed below:
