2002 October | Marine Parts | Boat Accessories

Battery Switch

Posted October 31, 2002 By admin and has no comments yet.

Battery Switch
And if I switch to a battery, LED is off How do I connect the LED when the switch is up, so that Off?

The switch has 2 posts. I switch See how you hook the other posts I posted a negative Or positive and should be used to power your Object to connect to. So, while the other is connected to the LED One of the posts have been directly connected to the Toggle Switch on the battery While connected to the battery? It is located off And I still think the battery drain while?

Well, first of all, You should go to your circuit's resistance. Second, if the sound It is a switch SPST, it's not the battery, it makes no difference How> to. And yet it is connected to the sewer While it is located off <LOL! You really know you Do you need to do? No, you can not open the circuit When the flow. Literally, you have to do is to connect Everything in the series. You see, there's no wrong it Direction, if the connection is to be done ... But you Tell me about anything since the battery is required to limit current, It's impossible that you made me do it for you to know To figure.

Check out the Battery Switch listings below and save:

Shop->Sports and Outdoors->Boating and Sailing Accessories

Blue Sea 6007 m-Series (Mini) Battery Switch Selector (Blue Sea)
from $ 29.95

6007m-Series (Mini) Battery Switch SelectorMake before break contact design allows switching between battery banks without power interruptionSelectorSwitches battery bank 1 or battery bank 2 or both to a single load using one switchFeatures:Ignition protected - Safe for installation aboard gasoline powered boatsCase design allows surface, front panel, or rear panel mountingIsolating cover with snap-on sections protects rear contacts3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8" and M10 ring terminals7/8" (22.22mm) stud length to accept multiple cable terminalsIdeal for marine or RV applicationsAll non-corrosive marine grade metalsMolded in durable reinforced polycarbonateTactile textures indicate knob position by feel onlyLabel with international ON/OFF legendsRemovable key or knob remains positively retainedICON label set included for circuit identification

Stock Status : In 9 Stores

Guest 2112A Universal Mount Marine Battery On/Off Switch (230 Continuous, 345 Momentary Amps, Black) (Guest)
from $ 33.51

Guest Battery On / Off Switch makes it easy to be in control. SAVE BIG! Put battery control at your fingertips. The Guest Battery On / Off Switch has a new design that is easy to retrofit into existing hole patterns. It comes with heavy duty copper contacts and can be used with 6, 12, 24 or 36 volt systems. The exclusive flat 360 degree "sweep" contact design provides up to 60% more contact area than other switch designs. There's more: "Make before break" contacts allow selection of all positions except "off" while engine is running; Built-in skirt protects connections; Surface or rear panel mounting; Marine grade construction; Continuous amps: 230; Momentary amps: 345; 1-year warranty; Measures 5" d x 2 3/4" h. An essential accessory for less! Order Today! Guest Battery On / Off Switch, Black

Stock Status : In 5 Stores

Guest 2102 Cruiser Series Marine Battery On/Off Switch (Guest)
from $ 53.50

Stock Status : In 4 Stores

Guest: Universal Mount Switch
from $ 29.30

Battery switch permits selection between either of two batteries, operation of both batteries in parallel, or complete disconnect of both batteries.

Stock Status : In 4 Stores

Charles Industries 5000SP Series Electronic 3 Stage Battery Charger 50Amp with Battery Type Switch
from $ 551.58

Five Reasons to buy a Charles Battery Charger1. Fully Automatic Recharging of Different Battery Types Charles chargers will automatically recharge up to 3 banks of batteries simultaneously. Accurately and efficiently recharge to promote battery longevity, saving you money! Charles 5000 SP & 2000 SP chargers feature a battery type selector switch, which can be set to charge lead-acid, gel or AGM batteries.2. The Ability to Simultaneously Recharge and act as a Power Supply Whether charging or not, the Charles chargers can also provide constant DC power to run DC loads like automatic bilge pumps and DC lights.3. Built for the Marine Environment with Safety in mind Chargers feature thermal, over-current, reverse-polarity and ignition protection. Constructed with the highest quality corrosion-resistant, UL recognized components and enclosures. These rugged chargers provide trouble-free power in the marine environment.4. Marine UL Listed The Charles 5000SP Series have passed the rigorous

Stock Status : In 6 Stores

GUEST 2303A BATTERY SWITCH
USD 183.00

Continuous Amps: 450 Momentary Amps: 800 Cable Lug Size: 5/8" Color: Gray Dimensions: 5-1/2" sq x 3-1/2"H Polycarbonate case For 6, 12, 24 or 36 Volt systems One year warranty